Curtain Style / January 18, 2019 / Aaliyah Dotson
Curtain tracking can be attached to solid or falsedrop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole.
To establish the height of the curtain there are three measurements needed to be determined. Begin by measuring the height from the floor to the ceiling. For this example let's start with a 10 foot ceiling which is 120 inches in height. Next measure the height of the carrier and curtain tracking; this is usually 3"-4" combined. The third measurement to determine is the open space wanted below the bottom of the curtain; 12"-18" is typical.
You MightAlso Like