Curtain Style / January 18, 2019 / Aaliyah Dotson
Quality curtain tracking is made of 16 gauge extruded aluminum and is typically sold in eight foot lengths. If shorter lengths are required, tracking may be easily cut down with a hacksaw. Curves pre-bent to 45 deg. and 90 deg. are available for applications requiring the curtain to bend around a room; curves are 2 feet by 2 feet and bent at a 12 inch radius.
To establish the height of the curtain there are three measurements needed to be determined. Begin by measuring the height from the floor to the ceiling. For this example let's start with a 10 foot ceiling which is 120 inches in height. Next measure the height of the carrier and curtain tracking; this is usually 3"-4" combined. The third measurement to determine is the open space wanted below the bottom of the curtain; 12"-18" is typical.
You MightAlso Like