Curtain Style / February 22, 2019 / Aaliyah Dotson.
If you choose translucent curtains such as nets or sheer curtains which can often create a subtle light effect on your room during the day, it is important to remember that these curtains do not provide privacy, especially at night time. These types of curtains can be used in conjunction with opaque curtains to aid in desired privacy. These net curtains can aid in preventing glare during the day, although not totally blocking light. If your window requires more privacy during the day time from peering eyes, consider using sheer or net curtains, along with opaque curtains for night privacy.
An end-stop should be placed at both ends of the curtain tracking setup. Curtain tracking end-stops are used to prevent curtain carriers from slipping out. One end should contain a snap out fitting to allow for easy installation and replacement of curtain carriers. Snap out fittings sit inside an end-stop and are easily removed. Removal is necessary to install or replace your curtain carriers without removing the curtain tracking from the ceiling.
If you do not measure your windows and just guess you may end up with the made-to-measure curtains either being too large or too small and you certainly don't want that! they must fit properly so take the time to get accurate measurements of your windows and then you will have no problems. Measuring for made to measure curtains:
To establish the height of the curtain there are three measurements needed to be determined. Begin by measuring the height from the floor to the ceiling. For this example let's start with a 10 foot ceiling which is 120 inches in height. Next measure the height of the carrier and curtain tracking; this is usually 3"-4" combined. The third measurement to determine is the open space wanted below the bottom of the curtain; 12"-18" is typical.
You MightAlso Like