Curtain Style / January 16, 2019 / Aaliyah Dotson
Curtain tracking can be attached to solid or falsedrop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole.
Once you have determined what length of curtains you would like you need to then measure the length with a tape measure curtains are usually manufactured or made in pairs but the measurements you see on ready made curtains on the packaging is individual curtain measurements rather than both of them together generally the total width of both curtains should be 2 to 2 times the width of the curtain pole or the track. This is only a rough guide and if you have any other questions please get in touch with us here at curtains online.
You MightAlso Like