Curtain Style / January 16, 2019 / Aaliyah Dotson
An end-stop should be placed at both ends of the curtain tracking setup. Curtain tracking end-stops are used to prevent curtain carriers from slipping out. One end should contain a snap out fitting to allow for easy installation and replacement of curtain carriers. Snap out fittings sit inside an end-stop and are easily removed. Removal is necessary to install or replace your curtain carriers without removing the curtain tracking from the ceiling.
Quality curtain tracking is made of 16 gauge extruded aluminum and is typically sold in eight foot lengths. If shorter lengths are required, tracking may be easily cut down with a hacksaw. Curves pre-bent to 45 deg. and 90 deg. are available for applications requiring the curtain to bend around a room; curves are 2 feet by 2 feet and bent at a 12 inch radius.
You MightAlso Like