Curtain Style / February 28, 2019 / Aaliyah Dotson.
Curtain tracking can be attached to solid or falsedrop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole.
Curtains and curtain tracks or poles can be bent to fit a bay window - Although some vertical blinds can be bent to the shape of a bay window, a vertical blind will take away the lovely effect and leave the room looking more like an office. A curtain track or curtain pole can be made to measure and bent to suit a bay window and the curtains will once again add elegance and style. Curtain tracks are also more flexible and can be made to fit a wider range of bay windows.
To establish the height of the curtain there are three measurements needed to be determined. Begin by measuring the height from the floor to the ceiling. For this example let's start with a 10 foot ceiling which is 120 inches in height. Next measure the height of the carrier and curtain tracking; this is usually 3"-4" combined. The third measurement to determine is the open space wanted below the bottom of the curtain; 12"-18" is typical.
Reliable and cost effective - With so many working parts or fiddly clips, blinds tend to be less reliable than curtains on a track or a pole. Combining curtains with a good, reliable curtain track or pole can be a more cost effective option; especially as curtain prices have been greatly reduced since the introduction of ready-made and express curtain making services. And if your requirements change, you can simply hang new curtains on your existing track or pole.
You MightAlso Like