Curtain Style / January 20, 2019 / Aaliyah Dotson.
The first step to take when measuring for curtains is to start by measuring the width of the curtain pole or track this will then determine how long you would like your curtains to be. A curtain pole is a good indicator as to where the curtains will finish either at the seal length below the seal or touching right down to the floor we recommend as a rough guide that the curtains should finish 1.5 cm above the sale. If you would like your curtains to fall below the seal we recommend that they finished 15 cm below that if you want your curtains to flow from top to bottom from the rod to the floor we would then recommend a gap of 1.5 cm above the floor.
An end-stop should be placed at both ends of the curtain tracking setup. Curtain tracking end-stops are used to prevent curtain carriers from slipping out. One end should contain a snap out fitting to allow for easy installation and replacement of curtain carriers. Snap out fittings sit inside an end-stop and are easily removed. Removal is necessary to install or replace your curtain carriers without removing the curtain tracking from the ceiling.
Now curtains are used in a decorative manner as well as practical functions. Depending on the window you need to dress, curtains can become a focal point of an entire room or frame a view from the window. Interior decorators use colour, style and new materials to help create an excellent looking window curtain.
A screw insert is then placed in the bottom of the suspension tubing allowing the curtain tracking to be attached. Suspension tubing should be placed every six feet and the tracking ends can be attached to a wall with a nylon wall bracket.
You MightAlso Like